The safety shower is a device for emergency flushing or showering of the eyes and body when the eyes or body of the site operator comes into contact with toxic, harmful and other corrosive chemicals, to prevent further harm to the human body caused by the hazardous chemicals. However, these devices are only a preliminary treatment for the eyes and body, and cannot replace medical treatment. In serious cases, further medical treatment must be carried out as soon as possible. In the event of an accidental injury, the safety shower can be quickly sprayed and rinsed to minimize the damage.
The emergency shower can be used for emergency flushing of the eyes, face and other parts of the body. Push the handle to activate the safety shower, and the clean water will automatically come out of the eyewash nozzle. After use, reset the push handle and the dust cover.
There are still many precautions when using safety shower. The emergency shower eyewash is only used in emergency situations to temporarily delay the further damage to the eyes and body caused by harmful substances. It cannot replace medical treatment. The equipment could only operate under room temperature, and the pipeline antifreeze work should be done in winter; The eyewash must not be covered, which will affect the normal use of the safety shower; The installation height of the eyewash should be about 1.2 meters to 1.3 meters; The eyewash should be installed near the dangerous goods storage in each workshop (within 30 meters); when using the eyewash, gently push the handle to let the water automatically spray out. The handle must be reset after use.